Products

PRODUCTS

2Ton Steel Jack Stand Car Lifting Stand
  • 2Ton Steel Jack Stand Car Lifting Stand2Ton Steel Jack Stand Car Lifting Stand
  • 2Ton Steel Jack Stand Car Lifting Stand2Ton Steel Jack Stand Car Lifting Stand
  • 2Ton Steel Jack Stand Car Lifting Stand2Ton Steel Jack Stand Car Lifting Stand
  • 2Ton Steel Jack Stand Car Lifting Stand2Ton Steel Jack Stand Car Lifting Stand

2Ton Steel Jack Stand Car Lifting Stand

This 2 Ton Steel Jack Stand from LIFEDE is constructed from heavy-duty solid steel, it delivers stable and reliable support after lifting your car with a jack. The adjustable height design allows you to lock it at your desired working height safely. Built with a sturdy saddle and anti-slip structure, it effectively prevents slipping during repair work such as tire replacement, brake service and chassis inspection. Always use in pairs for maximum safety.

    The LIFEDE heavy-duty 2 ton jack stand car lifting stand is an indispensable safety tool for automotive maintenance, designed to securely hold your vehicle after lifting by a hydraulic jack. Constructed from high-strength welded carbon steel, it delivers outstanding rigidity and load-bearing performance, while the powder-coated surface effectively resists rust, scratches and corrosion for extended service life.

    2Ton Steel Jack Stand Car Lifting Stand

    The 2 ton jack stand car lifting stand adopts a reliable ratchet locking structure for quick, stepless height adjustment, allowing you to lock the saddle firmly at your required working height. The wide pyramid-shaped base greatly lowers the center of gravity and enhances overall stability to prevent tipping during operation. The thickened anti-slip saddle provides stable contact with vehicle chassis support points and avoids sliding.

    2Ton Steel Jack Stand Car Lifting Stand 2Ton Steel Jack Stand Car Lifting Stand

    Product Specifications

    Item Parameter
    Model DE0602
    Material High-strength carbon steel
    Net Weight 5 kg
    Gross Weight 5.3 kg
    Min Height 280 mm
    Max Height 425 mm
    Measurement 210×175×330 mm
    Color Red / Orange / Custom
    Package Carton Box

    Operation Workflow

    1. Park the vehicle on a firm, flat and level concrete ground. Engage the parking brake and chock the opposite wheels to prevent rolling.
    2. Use a hydraulic floor jack to lift the vehicle slowly until the chassis reaches your desired working height.
    3. Place the jack stand under the designated factory support point of the vehicle chassis. Do not place it on the oil pan, fuel tank or thin sheet metal.
    4. Adjust the saddle height of the jack stand by pulling the ratchet handle, raise the saddle until it touches and bears the chassis firmly. Make sure the lock pin/ratchet is fully engaged and locked in place.
    5. Slowly lower the hydraulic jack to transfer the full vehicle weight onto the jack stand. Gently shake the vehicle to double-check that the stand is stable and will not shift or tip.
    6. Start your maintenance work only after confirming everything is secure.
    7. When finishing repair: Raise the vehicle slightly with the hydraulic jack to take weight off the jack stand. Release the ratchet lock, lower the saddle, remove the jack stand, then slowly lower the vehicle to the ground completely.

    Important Safety Warnings

    • Always use jack stands in pairs.
    • Never exceed the rated 2 Ton load capacity.
    • Never work under the vehicle supported only by a hydraulic jack.
    • Inspect the stand before each use. Stop using it if there is bending, cracking or damaged locking parts.
    2Ton Steel Jack Stand Car Lifting Stand

    FAQ

    Q1: Can I lift the car directly with this jack stand?

    A: No. This is a supporting stand only, NOT a lifting jack. Use a hydraulic jack to lift the vehicle first, then transfer the load onto the jack stand.

    Q2: What is the lead time?

    A: Normally, the lead time is 25–30 working days after receiving your deposit and confirmed artwork. It depends on the total order quantity and our current production schedule.

    Q3: Can we customize logo on the jack stand?

    A: Yes. Laser marking is available on the steel surface. We need your vector AI / PDF logo file. Laser engraving will add 3–5 working days to the lead time.

    Send Inquiry
    Contact Info
    • Address

      Rm705 7th Floor Lucky Power Building No.18 Zhenbei Road Yuxin Town Nanhu District Jiaxing City Zhejiang Prov. 314009. China.

    Looking to buy auto maintenance tools or motorcycle lift equipment in bulk? Send LIFEDE your product list and purchasing requirements to discuss prices and sourcing options.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept