Products

PRODUCTS

22Ton Pin Type Car Jack Stand
  • 22Ton Pin Type Car Jack Stand22Ton Pin Type Car Jack Stand
  • 22Ton Pin Type Car Jack Stand22Ton Pin Type Car Jack Stand
  • 22Ton Pin Type Car Jack Stand22Ton Pin Type Car Jack Stand
  • 22Ton Pin Type Car Jack Stand22Ton Pin Type Car Jack Stand

22Ton Pin Type Car Jack Stand

The heavy-duty pin type car jack stand from LIFEDE is engineered for stable vehicle support after lifting. Built with thick welded steel construction, it delivers reliable load capacity up to 22 tons. The adjustable height design with a locking pin allows quick and secure positioning at different working heights. The wide base greatly improves stability and prevents tipping, while the saddle is shaped to fit vehicle chassis safely. Equipped with a convenient carrying handle for easy transport.

    Our 22-ton pin lock car jack stand is a robust safety support tool for garages and workshops. Made of heavy-gauge steel with solid welding, it offers excellent strength and durability. Height adjustment is simple by removing and reinserting the safety pin. The large footprint base effectively disperses pressure to avoid sinking or tilting. The integrated handle makes moving and storage hassle-free. Always use it in pairs to hold cars, trucks and light commercial vehicles securely during maintenance work. This LIFEDE 22ton pin type car jack stand is a must-have safety tool matched with hydraulic jacks.

    22Ton Pin Type Car Jack Stand

    Product Specifications

    Item Parameter
    Model DE0622
    Material High-strength carbon steel
    Capacity 22Ton
    Net Weight 32 kg
    Gross Weight 34 kg
    Min Height 300 mm
    Max Height 500 mm
    Measurement 420×320×390 mm
    Color Red / Blue / Custom
    Package Carton Box

    Operation Workflow

    1. Select firm, flat and level ground before setup. Do not use on soft, sloped or slippery surfaces.
    2. Lift the vehicle to your target height using a hydraulic floor jack first.
    3. Place the jack stand under the vehicle’s factory-specified lifting/support point.
    4. Pull out the safety pin, adjust the inner post to the matching height, then reinsert the pin firmly to lock the position.
    5. Slowly lower the floor jack until the full weight of the vehicle rests steadily on the jack stand.
    6. Shake the vehicle slightly to double-check stability before starting under-car work.
    7. After finishing maintenance, lift the vehicle with the floor jack again to take load off the jack stand, remove the safety pin, lower the post and take away the stand.

    Important Safety Warnings

    1. Never exceed the rated 22-ton load capacity. Always use jack stands in pairs.
    2. This jack stand is only for static supporting. Do not lift or bounce the vehicle while it is resting on stands.
    3. Only support on manufacturer-approved chassis points. Never support on fuel tanks, oil pans or thin body panels.
    4. Inspect before each use: check for cracked welds, bent posts, deformed base or damaged safety pin. Stop using if any defect is found.
    5. Keep hands and limbs away from the saddle and adjustable post during height adjustment.
    6. Do not strike or modify the jack stand. Keep it away from impact and welding heat.
    7. Store in a dry place to prevent rust. Lubricate the moving parts periodically.
    8. Never work under a vehicle supported only by a hydraulic jack.
    22Ton Pin Type Car Jack Stand

    FAQ

    Q1: What is the difference between pin type and ratchet type jack stands?

    A: Pin type stands feature simpler structure, lower failure rate and better impact resistance. The ratchet type is faster for height adjustment, while pin lock is more favored by heavy-duty workshop users.

    Q2: How do you control the quality of these jack stands?

    A: We adopt thick steel plate and full welding. Every unit will pass load test and visual inspection before packing to check weld strength, pin fit and base deformation.

    Q3: What is the production lead time for bulk orders?

    A: Normally 30–45 working days after receiving your deposit and confirming all details. The exact time depends on order quantity and production schedule.

    Send Inquiry
    Contact Info
    • Address

      Rm705 7th Floor Lucky Power Building No.18 Zhenbei Road Yuxin Town Nanhu District Jiaxing City Zhejiang Prov. 314009. China.

    Looking to buy auto maintenance tools or motorcycle lift equipment in bulk? Send LIFEDE your product list and purchasing requirements to discuss prices and sourcing options.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept