Products

PRODUCTS

Hydraulic Bottle Jack 20Ton Welded Bottle Jack
  • Hydraulic Bottle Jack 20Ton Welded Bottle JackHydraulic Bottle Jack 20Ton Welded Bottle Jack
  • Hydraulic Bottle Jack 20Ton Welded Bottle JackHydraulic Bottle Jack 20Ton Welded Bottle Jack
  • Hydraulic Bottle Jack 20Ton Welded Bottle JackHydraulic Bottle Jack 20Ton Welded Bottle Jack

Hydraulic Bottle Jack 20Ton Welded Bottle Jack

This 20 Ton Air Hydraulic Welded Bottle Jack from LIFEDE supports both air and manual hydraulic operation. Heavy welded structure ensures high strength and long service life. Quick piston return by dual springs, fitted with air control assembly and extension handles. Overload safety protection guarantees reliable lifting for trucks, machinery and workshop heavy lifting jobs.

    The LIFEDE 20 Ton air hydraulic bottle jack combines pneumatic and manual hydraulic dual functions.Adopted fully welded heavy-duty construction, it features outstanding durability and stable load-bearing capacity. Built-in two strong return springs enable fast and smooth piston retraction after lifting.

    Hydraulic Bottle Jack 20Ton Welded Bottle Jack

    Equipped with an air hose, air control gun and manual extension handle, you can choose air-driven operation for labor-saving lifting or manual pumping when compressed air is unavailable. The adjustable screw extension saddle allows fine-tuning to fit different lifting heights.

    With safety overload protection design,our 20 Ton Air Hydraulic Welded Bottle Jack effectively prevents overloading risks. Compact bottle-type body is easy to store and carry, ideal for auto repair shops, farms, construction sites and roadside emergency lifting tasks.

    Hydraulic Bottle Jack 20Ton Welded Bottle Jack Hydraulic Bottle Jack 20Ton Welded Bottle Jack

    Product Specifications

    Item Parameter
    Model DE0220
    Material High-strength carbon steel
    Net Weight 15 kg
    Gross Weight 16 kg
    Min Height 260 mm
    Max Height 510 mm
    Measurement 280×200×180 mm
    Color Red / Blue / Custom
    Package Carton Box

    Operation Workflow

    1. Before lifting, turn the release valve clockwise to close it snugly (do not over-tighten). Chock the vehicle wheels and park on firm, flat ground. Place the saddle exactly on the manufacturer-specified lifting point. Adjust the threaded extension saddle to get close to the load for less pumping work.
    2. Air-driven lifting: Connect the air hose to the 1/4” quick connector. Keep the air supply at 90–120 PSI. Press the air control trigger to lift the load steadily.
    3. Manual hydraulic lifting (no air source): Insert the extension pump handle into the pump socket, then pump up and down in full, smooth strokes to raise the load.
    4. Once you reach the required height, immediately support the load with matched-capacity jack stands. Never work under a load held only by this jack.
    5. To lower the load: Make sure no people or obstacles are underneath. Slowly turn the release valve counterclockwise a small amount. The ram will retract automatically by the return springs.
    6. After use, remove the jack stands fully, lower the ram completely, cut off the air supply and disconnect the air hose, then store the jack in a dry place.
    Hydraulic Bottle Jack 20Ton Welded Bottle Jack Hydraulic Bottle Jack 20Ton Welded Bottle Jack

    FAQ

    Q1: What is the recommended working air pressure?

    A: The suitable air pressure range is 90–120 PSI. Do NOT exceed 120 PSI, otherwise it may damage internal seals and reduce service life. The air inlet is 1/4 inch quick connector.

    Q2: Why does the ram sink slowly after lifting?

    A: Common reasons: trapped air inside the hydraulic system, insufficient oil level or worn seals. You can bleed air following the manual, check oil level, or replace the seal kit if leaking.

    Q3: Is this jack CE certified?

    A: Yes, this 20 ton air hydraulic bottle jack meets CE safety standard, qualified for EU market sale.

    Q4: What is the advantage of welded bottle jack compared with threaded type?

    A: Fully welded structure has better overall rigidity, stronger impact resistance and higher stability under heavy load, more suitable for frequent heavy-duty repair work in auto shops.

    Send Inquiry
    Contact Info
    • Address

      Rm705 7th Floor Lucky Power Building No.18 Zhenbei Road Yuxin Town Nanhu District Jiaxing City Zhejiang Prov. 314009. China.

    Looking to buy auto maintenance tools or motorcycle lift equipment in bulk? Send LIFEDE your product list and purchasing requirements to discuss prices and sourcing options.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept